12-02-2020, 16:23:33
Bonjour,
j'ai un message "hot" qui s'affiche sur un séchoir gaz,
j'ai une notice en anglais mais avec laquelle j'ai un peu de mal,
je vous mets le texte en anglais,
si quelqu'un peut me traduire,
merci
Indicates a possible overheating condition. The Phase 5 Dual Microprocessor Controller (DMC) computer
monitors the temperature in the dryer at ALL times. If the Phase 5 DMC computer detects that the
temperature in the dryer has exceeded 170º F (77º C), it will disable ALL the outputs (shut the dryer
down), the tone (buzzer) will sound for approximately 5-seconds and the display will read “Hot.” The
light emitting diode (L.E.D.) display will continue to read “Hot” until the temperature sensed has dropped
to 170º F (77º C) or lower and the Phase 5 DMC computer is manually reset by closing and opening the
Program Switch (PS).
j'ai un message "hot" qui s'affiche sur un séchoir gaz,
j'ai une notice en anglais mais avec laquelle j'ai un peu de mal,
je vous mets le texte en anglais,
si quelqu'un peut me traduire,
merci
Indicates a possible overheating condition. The Phase 5 Dual Microprocessor Controller (DMC) computer
monitors the temperature in the dryer at ALL times. If the Phase 5 DMC computer detects that the
temperature in the dryer has exceeded 170º F (77º C), it will disable ALL the outputs (shut the dryer
down), the tone (buzzer) will sound for approximately 5-seconds and the display will read “Hot.” The
light emitting diode (L.E.D.) display will continue to read “Hot” until the temperature sensed has dropped
to 170º F (77º C) or lower and the Phase 5 DMC computer is manually reset by closing and opening the
Program Switch (PS).
