07-02-2014, 07:00:07
"K. Dual Microprocessor Controller (DMC) computer light emitting diode (L.E.D.) display reads
“SEFL”...
The “SEFL” display condition indicates a rotational sensor circuit failure, which means that there is a fault
somewhere in the basket (tumbler) rotational detection circuit or the DMC computer program related to this
circuit (PL01) is set incorrectly in the active mode (“SEn”) where the dryer is not equipped with the optional
rotational sensor and should be set in the inactive mode (“nSEn”).
If the dryer is equipped with the optional rotational sensor and for whatever reason the DMC computer detects
that the basket (tumbler) is not turning, it will disable ALL of the dryer outputs (shut the dryer down), and the
L.E.D. display will read “SEFL.” The L.E.D. display will continue to read “SEFL” until the DMC computer is
manually reset by closing and opening the Program Switch (PS)."
Aucune importance pour "ESFL". Un bug dans la doc anglaise. ( Encore un ;-)
* Inversion de phase en mono ???????? :/
“SEFL”...
The “SEFL” display condition indicates a rotational sensor circuit failure, which means that there is a fault
somewhere in the basket (tumbler) rotational detection circuit or the DMC computer program related to this
circuit (PL01) is set incorrectly in the active mode (“SEn”) where the dryer is not equipped with the optional
rotational sensor and should be set in the inactive mode (“nSEn”).
If the dryer is equipped with the optional rotational sensor and for whatever reason the DMC computer detects
that the basket (tumbler) is not turning, it will disable ALL of the dryer outputs (shut the dryer down), and the
L.E.D. display will read “SEFL.” The L.E.D. display will continue to read “SEFL” until the DMC computer is
manually reset by closing and opening the Program Switch (PS)."
Aucune importance pour "ESFL". Un bug dans la doc anglaise. ( Encore un ;-)
* Inversion de phase en mono ???????? :/
Si j'avais su, j'aurais pris ma retraite plus tôt...( vers 25-30 ans ) 